© by WilTec Wildanger Technik GmbH
Item 61123
Page 3
06 2021
-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation
instructions carefully and make sure you have understood its content.
Keep these operation instructions safe.
General safety information
Important!
Please read and understand all instructions. Failure to follow the instruc-
tions below could result in electric shock, fire, and/or serious injury.
Keep these in-
structions in a safe place.
Danger! -
To reduce the risk of injury, be sure to read the operating instructions be-
fore use!
Note! Wear ear protection.
Exposure to noise can cause hearing loss.
Caution! Wear a dust mask.
Wood and other materials can generate harmful dust.
Never use material containing asbestos.
Danger! Risk of injury!
Do not get your hands into the saw area
and/or the saw blade. If you hold the saw with both hands, the saw
blade cannot injure your hands.
Caution! Wear protective glasses.
During sawing, sparks, splin-
ters, chips and dust can arise. These can lead to loss of vision. The
device has also a laser.
Safety instructions for the laser
•
Read all safety warnings and instructions. Failure to follow the safety instructions can result in
electric shock, fire and/or serious injury. Keep all safety information and instructions for future
use.
•
Under normal circumstances, these lasers pose no optical hazard. Nevertheless, looking di-
rectly into the beam can lead to temporary blindness. Therefore: Do not look directly into the
laser beam. Please follow all safety instructions.
These are as follows:
•
The laser must be used and maintained according to the manufacturer's instructions.
•
Never point the laser beam at people or objects that are no workpiece.
•
Make sure that the laser is always aimed at a stable workpiece without a reflective surface,
e.g., wood or rough surfaces. Bright and reflective surfaces such as steel are not suitable
for use with the laser. The beam can be reflected onto the user.
