ASSEMBLY
1. Attach the Spring Tine (#17) to the Frame (#8) by using the Round Head Bolt M8x20 (#16), Hex Nut
M8 (#6) and Lock Washer Ø8 (#7), then tighten.
2. Attach the Lift Handle (#1) to the Frame (#8) by using the Hex Bolt M5x30 (#5) and Hex Nut M5
(#15), then tighten.
3. Attach the Adjusting Rod (#4) to the Frame (#8) by using the Hex Bolt M8x25 (#3), Hex Nut M8 (#6)
and Lock Washer Ø8 (#7), then tighten.
4. Attach the Adjusting Frame (#14) to the Frame (#8) by using Pin (#9) and Hair Cotter Pin Ø3 (#10).
5. Insert the Plastic Cap (#18) to the Adjusting Frame (#14).
6. Attach the Connector (#11) to the Bracket (#12) by using the Hex Bolt M8x45 (#13), Hex Nut M8
(#6) and Lock Washer Ø8 (#7), then tighten.
7. Attach the Connector (#11) to the Bracket (#12) by using Pin (#9) and Hair Cotter Pin Ø3 (#10).
8. Connect the Adjusting Steel Block (#2) with the Adjusting Rod (#4), adjust them for working depth.
9. The Hex Bolt M8x25 (#3), Hex Nut M8 (#6) and Lock Washer Ø8 (#7) will use for connecting the
rake.
PARTS LIST
Part #
Description
QTY
Part #
Description
QTY
1
Lift Handle
1
10
Hair Cotter Pin Ø3
2
2
Adjusting Steel Block
1
11
Connector
1
3
Hex Bolt M8x25
6
12
Bracket
1
4
Adjusting Rod
1
13
Hex Bolt M8x45
2
5
Hex Bolt M5x30
1
14
Adjusting Frame
1
6
Hex Nut M8
22
15
Hex Nut M5
1
7
Lock Washer Ø8
22
16
Round Head Bolt M8x20
15
8
Frame
1
17
Spring Tine
15
9
Pin
2
18
Plastic Cap
1
© by WilTec Wildanger Technik GmbH
Seite 3
http://www.WilTec.de
http://www.aoyue.eu
November 2019 Version 5
