© by WilTec Wildanger Technik GmbH
Seite 2
http://www.wiltec.info
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury by means of fire or
electric shock we urge that our clients take some basic safety precautions when using this
device. Please read the operation instructions carefully and make sure you have understood its
content.
Always use a grounded power connection with the appropriate mains voltage. You can find the
corresponding mains voltage on the type plate. If you have any doubts about the connection being
grounded, have it checked by a qualified professional. Never use a faulty electric cable.
Do not open the pump in a wet or damp environment or if you are wet yourself and protect it from
direct sunlight. Install this device in a safe location so that nobody can step on the cable, fall over or
damage it. Make sure additionally you provide sufficient cooling through the ambient air and avoid
heat accumulation. Disconnect the power plug before cleaning the pump and use only a damp cloth
for cleaning. Avoid using cleaning agents and take care that no fluids penetrate into the device.
The interior of the pump contains no parts that can be inspected or serviced by the user. Leave the
maintenance, adjustment and repair to qualified technical personnel. In case of unauthorised
intervention the 2-year warranty is no longer valid! Keep these operation instructions safe.
1. Safety guideline
BEWARE
:
The use of this device is allowed on standing bodies of
water, garden ponds or swimming ponds and their
surrounding areas only with fault current protection-switch
with a triggering nominal current up to 30mA (according to
VDE 0100 Article 702 and 738).
The device is not suitable for use in swimming pools,
paddling pools and other bodies of water in which during
operation people or animals linger. The operation of the
device during the stay of people and animals in the danger
zone is not allowed. Ask your electrician.
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or you follow the instructions made by this person how to use
the device correctly.
Children should be supervised to make sure that they do not play with the device.
ATTENTION
:
Run a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
Use the device exclusively according to the intended purpose stated in the instructions for
use.
You are responsible for the safety of the working environment.
If the cable or the plug is damaged because of external influences, the cable must not be
repaired! It has to be replaced with a new one. This work can be carried out only by an
electrician.
The voltage indicated on the type plate of the device of 230 Volt alternating voltage has to
correspond to the existent mains voltage.
Never lift, carry or fixate the device by using the power cable.
Make sure that the electrical plug connection is placed in a flood-proof area and is protected
from moisture