WilTec 50144, Operation Manual

Page: 7 / 8

© by WilTec Wildanger Technik GmbH Item 50144 Page 7
http://www.WilTec.de
http://www.aoyue.eu 09 2021 -1
http://www.teichtip.de
Step 4-1
№ Name
Quantity
1 Hopper 1
23 Slot 1
Turn the hopper (1) upside down and push the slot (23) completely into the guide channel on the un-
derside of the hopper.
Step 5
№
Name Qty.
1 Hopper 1
21 Screw M6×40 4
16 Small flat washer 5
18 Hex nut M6 5
3 Spinner disc 1
20 Release pin 1
19 Screw M6×55 1
17 Lock washer 2
Fasten the hopper
(1) to the supports (5, 6, 7)
with the M6×40 screw (21), small washer (16)
and hexagon nut (18). Fasten the hopper to the
spreading disc (3) with the release pin (20).
Fasten the control cable
(1-1) to the front
bracket (9) with an M6×55 screw (19), a small
flat washer (16), a lock washer (17) and a cable
lock nut (22).
Note! The control cable (1-1) comes pre-
installed on the hopper.