WilTec 50144 Operation Manual Download Page 3

 

© by WilTec Wildanger Technik GmbH  

Item 50144 

Page 3 

 

http://www.WilTec.de

 

http://www.aoyue.eu 

  

09 2021

-1

 

http://www.teichtip.de

 

 

Introduction 

 
Thank you for purchasing this quality product.

 To minimize the risk of injury we urge that our cli-

ents  take  some  basic  safety  precautions  when  using  this  device.  Please  read  the  operation 
instructions carefully and make sure you have understood its content.

 

Keep these operation instructions safe. 
 

Safety instructions 

 

 

Before use, read the safety information and instructions in this manual carefully. Failure to ob-
serve the information can lead to injuries and property damage. 

 

Make sure that the screw connection is tight during assembly to ensure safe use. 

 

Check the spreader for damage before each use. Do not use it if it is defective. 

 

The spreader is intended for private use only. It is not suitable for commercial or industrial use. 

 

  Warning!

 

This  device  may  be  used  by  people  with  limited  physical,  sensory  or  mental 

capabilities or a lack of experience or the necessary specialist knowledge if they have been in-
troduced to the use of the device and are supervised by a person who is familiar with the de-
vice. 

 

Read the safety information for towing vehicle owners and towing vehicles. Know how to op-
erate your tractor before using the spreader. 

 

Children must not use the device and must be supervised in its vicinity to ensure that they do 
not play with the device. 

 

Read the safety instructions for towing vehicle owners and towing vehicles. Know how to op-
erate your tractor before using the spreader. 

 

Wear appropriate protection, for example protective glasses, protective goggles, safety shoes, 
etc. 

 

Keep body parts away from moving parts. 

 

When towing the spreader, do not drive too close to a stream or ditch and watch out for holes 
and other hazards that could cause you to lose control of the spreader and tractor. 

 

Only use the spreader if it is safe to stand and in a stable working position. Pay particular at-
tention to safe use on black ice and in wet weather. 

 

The spreader is  designed  exclusively for spreading fertilizers, seeds  or road salt. The use  of 
other filling materials is not permitted and contradicts proper use. 

 

When  spreading  fertilizer  and  road  salt,  observe  the  local  regulations  and  the  safety  instruc-
tions from the grit manufacturer. 

 

Do not use the spreader near other people or animals. 

 

Only use the spreader at walking pace. 

 

Do not use the spreader in rain or strong wind. Never leave it out in the rain. 

 

 

Summary of Contents for 50144









Reviews: