background image

IMPORTANT INFORMATION

Please read the instruction manual carefully before putting the device into operation. Improper
use may result in damage to persons and property. Persons who are not familiar with the man-
ual must not operate the device.
Keep the instructions for use. Children and adolescents are not permitted to use the device.

The majority of accidents during use of the compressor are due to non-compliance with basic safety
regulations. In order to avoid accidents, all potential sources of danger should be identified in good
time and the relevant safety regulations should be observed.
Never use the compressor improperly, but only as recommended by the manufacturer, and only if you
are absolutely sure that there is no danger to the user or persons in the vicinity.

NOTE: 

Check the device before each use. If damage is found, do not continue to use the device. Re -

pairs must only be carried out by the manufacturer or an authorized service partner. Never open the
device yourself.

SAFETY

Read all instructions!

Use lines and air tools suitable for the pressure higher than or equal to the operating pressure of
the compressor.

Drain the condensation water from the boiler daily or every 4 operating hours. Open the appropri -
ate device and tilt the compressor to drain the accumulated water.

To avoid danger, the compressed air jet must never be directed at persons or animals.

To avoid combustion, never touch the pipes, engine or any other hot components of the compres -
sor.

Do not make any changes to the compressor. Contact the manufacturer or an authorized service
partner for all repairs. Unauthorized modifications may affect compressor performance or cause
serious accidents if performed by personnel who do not have the necessary technical knowledge.

Solvents such as petrol, thinner, diesel oil or other substances containing alcohol can damage the
plastic parts. These parts should not be cleaned with such substances but with soapy water or
suitable liquids.

If the compressor produces strange noises or strong vibrations during operation, or if it is defec -
tive, the compressor must be stopped immediately. Contact the manufacturer or an authorized
service partner for troubleshooting.

Operate the compressor at the voltage indicated on the data plate. If the compressor is operated
at a voltage higher than the specified nominal voltage, the motor may be subjected to unaccept-
ably high temperatures.

Always keep the motor ventilation grille clean. Clean the grate at regular intervals if the compres-
sor is used in heavily soiled environments.

Check regularly that all screws and plates are securely fastened.

When operating the compressor, follow all instructions in this manual. Prevent the compressor
from being used by children or persons unfamiliar with its operation.

The compressor is a machine that produces compressed air. Never use the compressor for work
that is not described in the operating manual.

If a protective device or other components have been damaged, the compressor must be checked
before restarting to ensure safe operation. Check the alignment of components in motion, piping,
pressure terminals, compressed air connections and any other components that are important for
normal operation.

Always work carefully and remain awake. Do not use the compressor when you are tired. The
compressor must not be used if the user is under the influence of alcohol, drugs or medicines
which can cause fatigue.

When the compressor is used outdoors, only electrical extensions intended and marked for out-
door use may be used.

Do not unplug the power cord from the wall outlet. Keep the cable away from heat sources, oil and
sharp edges. Do not step on or squeeze the power cord.

Do not wear wide garments or jewellery as they may get caught in moving parts.   Wear hearing
protection if necessary.

© by WilTec Wildanger Technik GmbH 

Seite 15 

http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de

Summary of Contents for 50 l











Reviews: