WilTec 34244, Operation Manual

Page: 7 / 9

© by WilTec Wildanger Technik GmbH Item 34244 Page 7
http://www.WilTec.de
http://www.aoyue.eu 02 2022 -1
http://www.teichtip.de
Operation:
•
The pressure gauge reports the air tool working pressure.
•
Pull up the adjusting knob; its being clockwise rotated increases the pressure, a counter-clock-
wise rotation reduces the pressure.
•
Rotate the adjusting knob to achieve the right working pressure and lock it downwards by click-
ing it into place.
•
Do not rotate the knob against high resistance. If necessary, the height and the position of the
of the knob can vary slightly.
•
For emptying the condensed water collector use the water drain plug.
Exploded view and parts list
№ Name Qty. № Name Qty.
1 Screw 8 26 O-ring 1
2 Pipe nut 2 27 Cylinder head 1
3 Block 1 28 Cap screw 4
4 Rear body 1 29 Filter valve 1
5 Screw 4 30 Handle 1
6 Stationary motor 1 31 Pressure switch 1
7 Bearing 2 32 Water drain valve 1
8 Rotary motor 1 33 Condenser 1
9 Front body 1 34 Power switch 1
10 Counterweight 1 35 Wire 1
11 Pressure gauge 1 36 Rubber pad 4