IN-BUILDING SIGNAL BOOSTER WITH IN-LINE AMPLIFICATION
WILSON PRO 1050 SYSTEM
Upon power up, the 1050 MAIN unit will attempt to begin it’s calibration routine, which
lasts approximately 14 seconds during which time one of the following messages will
appear on the screen:
Boot Screen
BAND SELECT
RESET
CABLE LOSS
BAND SELECT
RESET
CABLE LOSS
BAND SELECT
RESET
CABLE LOSS
The 1050 In-Line unit has been found
and is communicating with the 1050
Main. Cable loss calibration is in
progress.
The 1050 In-Line unit has not been
found.
8
EN
1050 Main
Status Screen
In-Line Found Screen
No In-Line Screen
