ENTERPRISE
A8000
IN-BUILDING CELL SIGNAL AMPLIFIER
35
(LOCAL AMPLIFIER CONFIGURATION UTILITY cont.)
Bands can be turned ON/OFF, you can configure Inside Antenna Settings (ON/OFF) and
you can update the Outside Antenna Configuration (COMMON/SPLIT MODE).
Note: Once you make changes to either the Band Enable or Communication Settings,
you must wait at least 30 seconds before power cycling the unit or the new settings
will not be stored.
You can navigate through the site by clicking on the
Settings, Status
and
Antenna Tuner
icons located on the left then selecting
AMPLIFIER,
COMMUNICATIONS
or
SYSTEM
.
AMPLIFIER COMMUNICATIONS SYSTEM
