background image

3

Installation Instructions

1.  Place Magnetic Roof Top Antenna

To receive the best cell signal, select a location for the outside antenna that is preferably in the center of the vehicle’s roof, 12 inches 

away from any other antennas and free of obstructions, at least 8-12 inches from the rear or side windows or sunroof. 

The outside antenna must be installed vertically.  Signal 

performance will be degraded if the antenna is not vertical.
The antenna cable is small yet strong enough that it may be shut 

in most vehicle doors without damaging the cable.

For a more professional-looking installation, the antenna cable 

may be run under the door seal.  Carefully pull down the door 

seal.  Run the cable under the seal and push the seal back into 

place.  This prevents constant wear and tear on the cable as the 

door opens and closes.  The antenna cable is small enough to 

easily tuck under the door seal or plastic molding.

Magnet-Mount 

Antenna Shown

Carefully

Pull Down

Door Seal

Run Cable

Under Seal

Vehicle Installation

Exterior antenna 

communicates 

with cell site.

Amplifier boosts 

signal 

to

 and 

from

 

cell site.

Provides power to both the 

amplifier and charging for 

the Curve

*

*Curve is a registered trademark of Research In Motion Limited, Inc.

wpsantennas.com

1-877-594-5766

wpsantennas.com

1-877-594-5766

Summary of Contents for SIGNALBOOST C-Booster









Reviews: