Wilson Electronics Grand Slamm, Owner'S Manual, Page: 70 / 80

W I L S O N A U D I O S P E C I A L T I E S , I N C .
Replace the resistor with the supplied matching resistor. Tight-
en the new resistor in the old ones place.
Note: An improper resistor value will deteriorate your speaker
perfor mance
Plug your amplifier into the wall and turn it on.
Listen to the channel at a low level. The driver should now be
operat ing correctly.
Amplifier shuts off as soon
as it is turned on: Check to see if your speaker cables are properly secured. Look
for frayed ends, loose connections, a conductor contact-
ing the amplifier chassis.
Turn the amplifier off and disconnect it from the AC wall outlet.
Dis connect the preamplifier leads to the amplifier.
Now turn back on the amplifier.
If the problem is solved: There is something wrong with your
pream plifier or interconnect. Call your dealer.
If the problem persists: Leave the pre-amp leads disconnect-
ed and continue on to the next step.
Turn the amplifier off and disconnect it from the AC wall outlet.
Dis connect the speaker leads at the main input to the
speaker . Now turn the amplifier on.
6-2
X-1/ G
RAND
SLAMM O
WNER
’
S
M
ANUAL