Wilson Electronics Grand Slamm, Owner'S Manual, Page: 31 / 80

W I L S O N A U D I O S P E C I A L T I E S , I N C .
3-1
S
E C T I O N
3 . 0 - U
N C R A T I N G T H E
X - 1 / G
R A N D
S L A M M
Note: You will have many modules to unpack that will need to be separated into right and left channels.
Clear out 2 spaces, one for your left and one for your right channel modules. Place the ODD numbered
modules in the LEFT channel section and the EVEN in the RIGHT channel section.
S
ECTION
3.0 U
NCRATING THE
X-1/G
RAND
SLAMM
I
NITIAL
C
HECK
The X-1/Grand SLAMMs are sent to you in 8 wooden crates and one cardboard box. Upon receiv-
ing these crates, please check their condition. If any of the crates are damaged, please report it to the ship-
ping company for insurance verification.
M
ATERIALS
R
EQUIRED
• Metal shears
• Electric screw driver
• Phillips head drive bit
U
NCRATING THE
W
OOFER
C
ABINETS
A minimum of two strong adults is required to set
up the system. Locate the two largest crates numbered 1 and 2.
These contain the woofer enclosures and are the first components
of the systems to unpack (see Figure 1).
Note: These two woofer enclosures are very heavy, and care
should be taken to prevent injury.
U
NPACKING THE
W
OOFER
1 Open the top of each crate and determine the side
where the casters are connected to the bottom of
the woofer module.
2 Remove the packing material from between the casters and set the crate up so that the casters
on the woofer are toward the floor.
3 While one person holds the crate, the other person should roll the woofer enclosure out of the
crate. Be very careful not to scratch the module during this process.
F
IGURE
1- T
WO
W
OOFER AND
B
ASE