background image

Contents:

Antenna Options & Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick Install Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Finding the Strongest Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Outside Antenna Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing the Inside Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing a Wilson Electronics Signal Booster. . . . . . . . . . . . . . . . . . . . . 9
Powering up a Wilson Electronics Signal Booster . . . . . . . . . . . . . . . . . 10
Button Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Understanding LCD Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Warnings and Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 
Guarantee, Warranty & Specifications  . . . . . . . . . . . . . . . . .  Back Cover

Note: 

This manual contains important safety and operating information. Please read and follow the 

instructions in this manual. Failure to do so could be hazardous and result in damage to your Signal 
Booster.

Contents:

AG Pro

 

Quint

Selectable

700 (Band 12 / 17, 13) / 800 /
AWS (1700 / 2100) / 1900 MHz

In-Building Wireless
Smart Technology

   

Signal Booster 

Appearance of device and accessories may vary.

TM

Summary of Contents for AG Pro Quint Selectable

















Reviews: