For Technical Support, call 866-294-1660 or 435-673-5021.
1
Welcome to the Wilson Electronics Family of Products!
Thank you for purchasing the Wilson SignalBoost DT amplifi er system. You are just minutes away from
enjoying improved performance from your cellular phone and/or laptop data card. When installed properly,
the SignalBoost DT will signifi cantly reduce dropped calls and improve both voice and data signal quality.
By taking a few minutes to read and follow the simple instructions in this guide, you will get the most out of
your new amplifi er system. If you have questions during or after installation, please don’t hesitate to contact
a member of our Technical Support team by phone (866-294-1660 or 435-673-5021) or email (tech@
wilsonelectronics.com). We’re here to help!
Before Getting Started
This guide will help you properly install Wilson’s SignalBoost DT.
It is recommended that you read through
all of the installation steps and familiarize yourself with the product.
Read the instructions and visualize
where you want to place the components before mounting any equipment. If you do not understand the
instructions in full, please contact Wilson Technical Support at 866-294-1660 or 435-673-5021.
Inside this Package:
SignalBoost DT
Amplifi er
Antenna and Cradle
(locate outside on pole,
wall, or inside on window)
AC Power
Supply
Coaxial Cables
(20 and 30 feet)
Amplifi er
Wall Bracket
Wall-Mount
(Packet B)
Pole-Mount
(Packet A)
Tools Required for Installation:
Depending on your particular installation, you will need the following tools:
• Wall-mount - Drill and 3/16-inch bit, Phillips-head screwdriver
• Pole-mount - 1/4-inch open-end wrench or adjustable wrench
Desktop
Antenna
Cable
Connector
For Technical Support, call 866-294-1660 or 435-673-5021.
14
30-Day Money-Back Guarantee
All Wilson Electronics products are protected by Wilson’s 30-day money-back guarantee. If for
any reason the performance of any product is not acceptable, simply return the product directly to
the reseller with a dated proof of purchase.
1-Year Warranty
Wilson Electronics amplifi ers are warranted for one (1) year against defects in workmanship and/
or materials. Warranty cases may be resolved by returning the product directly to the reseller with
a dated proof of purchase.
Amplifi ers may also be returned directly to the manufacturer at the consumer’s expense, with a
dated proof of purchase and a Returned Material Authorization (RMA) number supplied by Wilson
Electronics. Wilson shall, at its option, either repair or replace the product. Wilson Electronics
will pay for delivery of the repaired or replaced product back to the original consumer if located
within the continental U.S.
This warranty does not apply to any amplifi ers determined by Wilson Electronics to have been
subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic
properties.
RMA numbers may be obtained by phoning Technical Support at 866-294-1660.
Disclaimer: The information provided by Wilson Electronics, Inc. is believed to be complete and
accurate. However, no responsibility is assumed by Wilson Electronics, Inc. for any business or
personal losses arising from its use, or for any infringements of patents or other rights of third
parties that may result from its use.
Operation is subject to the following two conditions: (1) This device may not cause interference and
(2) this device must accept any interference, including interference that may cause undesired operation of this
device.
Copyright © 2007 Wilson Electronics, Inc. All rights reserved.
Installation Instructions for the Following Wilson Amplifi er:
SignalBoost DT Dual-Band Cellular/PCS Amplifi er
Model # 271247-50, 271247-50
FCC ID: PWO271247ASB
IC: 4726A-271247ASB
The term “IC” before the radio certifi cation number only signifi es that Industry Canada technical specifi cations
were met.
