9
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Hours: 7 am to 6 pm MST.
10
Installing a Wilson Electronics Signal Booster
Select a location to install the Signal Booster that is away from
excessive heat, direct sunlight, moisture and that has proper
ventilation . Do not place the Signal Booster in an air-tight
enclosure . Recommended installation locations for in-building
Signal Boosters are near a power outlet and in a closet, or on a
shelf .
Note:
It is important to have adequate air ventilation. Maintain at
least 6 inches of clearance from surrounding objects.
Run the Outside Antenna cable to the Signal Booster and attach it
to the connector labeled “Outside Antenna” on the Signal Booster .
Run the Inside Antenna cable to the Signal Booster and attach it to
the connector labeled “Inside Antenna” on the Signal Booster .
Note:
For distances of 20 feet or more, use Wilson low loss cable to
prevent significant signal loss.
Note:
Be careful when plugging the connector in so as not to
damage the center pins on the connectors.
