WILSON AUDIO Sasha DAW, Installation And Care Manual

Page: 12 / 27

22
Sa sha DAW I n stal l ation and Car e G u ide
A u t h e n t i c E x c e l l e n c e ™
3. When removing the upper modules, take care so as not to hit the
modules on the crate and scratch the paint. Using the small shelf
on the rear of the module, tilt it so there is access to the bottom
side. Slide the other hand under the Upper Module for support,
and carefully lift the enclosure out of the crate.
4. The cloth grilles are attached to the modules. Detach the grilles
from the module and remove the protective plastic covering the
grill.
5. Place the Upper Module with an odd serial number on the left
side of the room and the module with an even serial number on
the right side of the room.
Section 2.2—Crate Content Checklist
Now that you have unpacked your Sasha DAWs, you can inventory all the
additional items in the crates.
• Owners Manual
• Full-Line Product Brochure
• Warranty Registration Form
• (1x) Polishing Cloth
• (8x) ½”-13 Spike with Nut
• (8x) LG ½”-13 Mechanical Diode
S
e c t i o n
2 . 2— c
r At e
c
o n t e n t
c
h e c k l i S t
23
• (8x) ½”-13 [1 ½“] Set-Screw
• (8x) Large Aluminum Spike Pad
• (4x) “AA” Spike
• (2x) #2 Spike
• (2x) #3 Spike
• (2x) #4 Spike
• 1/2” Nut Driver (binding posts)
• 3/4” Combo Wrench (spike nuts)
• 2” Caster Wrench
• 7/16” Ratchet Wrench (alignment spikes)
• Universal Allen Driver
• 3/32” Allen Bit (resistor screws)
• 1/8” Allen Bit (woofer resistor panel screw)
• 5/32” Allen Bit (driver screws)
• 1/4” Allen Elbow (diode set-screws)
Note: After set up of the system, keep the shipping crates in case of future
shipping needs.
Note: Before setting up the Sasha DAW, study carefully Section 1, “In Your
Room.” It provides valuable information on determining the ideal room
location for your speakers.
W i l s o n A u d i o S p e c i a l t i e s