5
INSTALLATION INSTRUCTIONS
WWW.WILBRAD.COM.AU
First of all, you need to clear your password and fingerprint to restore the product to its initial state.
Secondly, you need to press RESET (more than 5 seconds) and release it after two short ”Di” sound, and then a
”Di” sound will be heard as well as the “OK” light will be blinked for a second after the system has been cleared.
Finally the system goes to sleep.
• After using the spare key, you need to turn the key back to pull out the key.
• Reminder: Please make sure that you unplug the power cord or spare key after “”using”” the backup
power socket or the spare key to open the drawer to avoid any misuse damage;
• Touching any key to activate the system, then the drawer will enter into the operating state when the
light is on.
• The drawer will enter power saving mode and turn off the screen if there is no operation for 10 seconds.
The function of alarm and lock. If you continuously enter the wrong password (5times), the “ERR” light will be
on for 8 seconds and the system will lock for 60 seconds or alarm for 30 seconds. The system will not respond
to any actions during the lock period. You need to turn off the power and restart it or wait for 60 seconds, and
then the system will return to normal state. During the system alarm, users can enter the correct password to
cancel the alarm, turn off the power and restart it or wait for 30 seconds to return the system to normal state.
Tips (1) The product supports fictitious password and supports up to 20 digits. For example: Although the
correct password is 23456, users can enter
Accessories
• Case bracket (optional)
• Screws pack
• USB power line and specifications
• Spare key
Restore Factory Settings
Notes
