Wilorton Holding MK-C-10-BM SERIES Operation Manual Download Page 80

Page: 80 / 416

6.25

UN01-2253CD

6.4.2

USA

GE INSTR

UCTIONS

01-GB-A6-300BL

6.4.2 - Stabilisation controls

4 - Extend the stabiliser arms to the

maximum open position signalled
by the yellow indicator light “C” (fig.
6.4.1).

5 - Open the cock “D”.
6 - Use the lever on the distributor to

place the outrigger on the ground.

7 - Close the cock “D”.
8 - Repeat the operations for each

sta-

biliser

Information

In cold climates, allow the pump to run
for a few minutes before manoeuvring
the crane to ensure the hydraulic oil
reaches the operating temperature.

A1 - retraction of the crane left stabi-

liser jack

A2 - extension of the crane left stabi-

liser jack

A3 - retraction of the crane left stabi-

liser arm

A4 - extension of the crane left stabi-

liser arm

A5 - retraction of the supplementary

crossbeam left stabiliser jack

MK-C-10-BM-317.1/1-EM

Summary of Contents for MK-C-10-BM SERIES

































































































































































































































































































































































































































Search results

Summary of Contents for MK-C-10-BM SERIES

Reviews:

Wilorton Holding MK-C-10-BM SERIES, Operation Manual, Page: 80 / 416

Search results

Summary of Contents for MK-C-10-BM SERIES

Reviews: