Wilorton Holding MK-C-10-BM SERIES, Operation Manual, Page: 413 / 416

4.8 Directing & using the lights
The tower can be rotated up to 340 degrees in order to direct the light as required.
‐ Release the rotation locking pin and turn the tower using the rotation handles on the mast
in order to direct the lights as needed. Don’t forget to lock the rotation afterwards.
‐ Additionally to the mast rotation, each of the LEDs can be adjusted on two axes and
tilted back and forth. This way the lights can be directed either vertically or horizontally. In
order to adjust the light on the horizontal axes, the encircled pin needs to be unlocked by
pulling it and then turning the floodlight. For any adjustments, the mast must be lowered
to allow access.
Mast rotation locking/unlocking pin LED floodlight
‐ After adjusting the lights, prepare to raise the tower by:
o Inspecting the cable and replacing it, if damaged.
o Checking mounting hardware for proper tightness and re ‐ torquing if necessary.
‐ Raise the tower using UP button located on the control panel (ref. to par. 4.2 Controls)
‐ Once the engine is up to temperature and running smoothly, switch the main circuit
breaker to the ON position.
‐ With the main circuit breaker on, switch each individual circuit breaker for the lights to the
ON position, one at a time.
‐ Close the control panel cover and keep it close when not in use, in order to protect the
controls.
‐ If a light does not work, check the lamps or the mast wiring.
Closing down the unit requires this same procedure in reverse. We recommend to switch
off the lights before lowering the tower, allowing them to cool.
413
MK-C-10-BM-317.1/1-EM