Wilo Yonos GIGA-N 125-5,5, Installation And Operating Instructions Manual

Page: 50 / 80

en Operation
50 WILO SE 2020-10
No. Designation Type Symbol Values/explanations Display conditions
4.4.1.0
Pump name Example:
GIGA-N 100/250-15/4 (display in ticker
format) Only the basic pump model ap-
pears on the display; version names
are not shown
4.4.2.0
Software version
of user control-
ler Displays the software version of the user
controller
4.4.3.0
Software version
of motor con-
troller Displays the software version of the motor
controller
5.0.0.0
Service Service menus
5.1.0.0
Multi pump Twin-head pump Only displayed when DP is active
(incl. sub-menus)
5.1.1.0
Operating mode
±
Main/standby operation Only displayed for twin-head pump
master
Parallel operation Only displayed for twin-head pump
master
5.1.2.0
MA/SL setting
±
Manual switching from master to slave
mode Only displayed for twin-head pump
master
5.1.3.0
Pump cycling Only displayed for twin-head pump
master
5.1.3.1
Manual pump
cycling
±
Carries out pump cycling independent of
countdown Only displayed for twin-head pump
master
5.1.3.2
Internal/external
±
Internal pump cycling Only displayed for twin-head pump
master
External pump cycling Shown only for twin-head pump
master, see “AUX” terminal
5.1.3.3
Internal: time in-
terval
±
Can be set between 8 hours and 36 hours
in 4-hour steps Displayed when internal pump cyc-
ling is activated
5.1.4.0
Pump enabled/
disabled
±
Pump enabled
Pump disabled
5.1.5.0
±
Individual fault signal Only displayed for twin-head pump
master
Collective fault signal Only displayed for twin-head pump
master
5.1.6.0
SBM
±
Individual readiness signal Only displayed for twin-head pump
master and standby/operation SBM
function
Individual run signal Only displayed for twin-head pump
master
Collective readiness signal Only displayed for twin-head pump
master
Collective run signal Only displayed for twin-head pump
master
5.1.7.0
External off
±
Individual External off Only displayed for twin-head pump
master
Collective External off Only displayed for twin-head pump
master
5.2.0.0
BMS Settings for Building Management System
(BMS) – building automation Including all sub-menus, only dis-
played when BMS is active