English
20
WILO SE 11/2015
10.1 Fault signals
If the fault cannot be remedied, please consult the specialist
technician or the Wilo factory after-sales service.
Code
no.
Faults
Causes
Remedies
E04
Undervoltage
Power supply too low
on mains side.
Check mains voltage.
E05
Overvoltage
Power supply too
high on mains side.
Check mains voltage.
E10
Blocking
Rotor blocked
Contact customer
service
E11
Warning signal
Dry run
Air in the pump
Check water
quantity/pressure.
E21
Overload
Sluggish motor
Contact customer
service
E23
Short-circuit
Motor current too
high
Contact customer
service
E25
Contacting/
winding
Winding defective
Contact customer
service
E30
Module
overheat
Module interior too
warm
Check operating con-
ditions in chapter 5.2
E36
Module
defective
Electronic compo-
nents defective
Contact customer
service