Installation and operating instructions Wilo-Stratos PICO
17
English
8.5
Activation of the Dynamic Adapt function
Press and turn the red button to select the symbol for the
Dynamic Adapt function. Press and turn again to activate or
deactivate Dynamic Adapt.
The word "auto" indicates that Dynamic Adapt is activated.
If the word "auto" is not lit up, the function is deactivated.
Confirm setting by pressing the red button.
Note: If the control mode
Δ
p-c is active while Dynamic Adapt is
activated, the control mode automatically switches to
Δ
p-v.
This is indicated by the
Δ
p-v symbol flashing give times.
Factory setting: Dynamic Adapt OFF
8.6
Activation of the setback operation
Press and turn the red button to select the symbol for the set-
back operation. Press and turn it again to activate (ON) or deac-
tivate (OFF) the setback operation.
Confirm setting by pressing the red button.
Factory setting: Setback operation OFF
8.7
Key lock (hold function)
Select the symbol for venting; this allows activation of the key
lock by pressing and turning the red button. Hold the red button
down for 10 seconds. The message "Hold" appears on the dis-
play. By turning, the key lock can now be activated (ON) or
deactivated (OFF).
If the key lock is activated, the pump settings cannot be
changed. After 10 seconds the display shows power consump-
tion and the power consumption meter again. If the red button
is pressed, "Hold" appears on the display.
To deactivate the key lock, repeat the steps as for activation.
Factory setting: Key lock OFF
