Installation and operating instructions Wilo-Para SCA
43
en
7.2 Setting the control mode
Select control mode
The LED selection of control modes and corresponding
pump curves takes place in clockwise succession.
• Press the operating button briefly (approx. 1 second)
for setting change.
LEDs display the set control mode and pump curve.
The following shows the various possible settings (for
example: Speed control range: high, setting/curve II):
LED display
Control mode
Setting/curve
1
Speed control range: high
I
2
Speed control range: low
III
3
Speed control range: low
II
4
Speed control range: low
I
5
Speed control range: medium
III
6
Speed control range: medium
II
