English
Installation and operating instructions: Wilo-SC-Fire Diesel A2P
7
2.6 Safety instructions for installation and maintenance work
The operator must ensure that all maintenance and installation work is carried out by authorised and qualified
personnel, who are sufficiently informed based on their own detailed study of the installation and operating
instructions.
Work on the product/unit must only be carried out when at a standstill. It is mandatory that the procedure
described in the installation and operating instructions for shutting down the product/unit be complied with.
Immediately on conclusion of the work, all safety and protective devices must be put back in position and/or
recommissioned.
2.7 Unauthorised modification and manufacture of spare parts
It is strictly forbidden to use batteries for any other purpose than to start the diesel motor.
3 Transport and interim storage
Upon receipt of the product:
•
Check for any damage that may have occurred during transit.
•
In the event of damage in transit take the necessary steps within the period defined by the transport
company within the time constraints.
WARNING! Risk of material damage!
Non-compliant transport and interim storage may cause material damage to the product.
•
The switchgear must be protected against humidity and any mechanical damage.
•
The product must not be exposed to temperatures lower than -10 °C and higher than
+50 °C.
4 Intended use
The SC-Fire A2P Diesel switchgear controls pumps in automatic pumping installations used for fire-fighting
purposes (sprinkler systems).
The design of this switchgear adheres to the technical regulations defined in the T1-1 of the A2P trademark.
The installation, functioning and maintenance are also defined in these technical regulations.
The relevant fields of application are habitable buildings, offices, hospitals, hotels, administrative and industrial
buildings.
