English
Installation and operating instructions: Wilo-SC-Fire Diesel A2P
5
1 General
About this document
The language of the installation and original operating instructions is German. All other languages of these
instructions are translations of the original installation and operating instructions.
The installation and operating instructions are an integral part of the product. They must be kept close to the
product and be ready for use if necessary. Strict adherence to these instructions is a precondition for the proper
use and correct operation of the product.
These installation and operating instructions correspond to the relevant version of the product and the
underlying safety standards valid at the time of going to print.
EC-Declaration of conformity:
A copy of the EC-Declaration of conformity is an integral part of these installation and operating instructions.
If a technical modification is made on the designs listed therein without prior approval or the declarations made
in the installation and operating instructions on product/personnel safety are not observed, this declaration loses
its validity.
2 Safety
These installation and operating instructions contain important information which must be adhered to during
installation, operation and maintenance. For this reason, these instructions must, without fail, be read by the
service technician and the responsible specialist/operator before installation and commissioning.
It is not only the general safety instructions listed under the main point “safety” that must be adhered to but also
the special safety instructions with danger symbols included under the following main points.
2.1 Symbols and signal words used in the installation and operating instructions
Symbols:
Danger: Imminent hazardous situation.
Non-observance may result in death or severe injury.
Danger: Danger due to electrical voltage.
Non-observance may result in death or severe bodily injuries by electric shock.
Useful or important information
WARNING!
Non-observance may result in severe injury.
WARNING!
Non-observance may result in a risk of damage of material or of the unit.
