WIL-IO-SP-WCC28001-11
6
•
To clear a pump clogged with debris, first,
UNPLUG PUMP
from electrical power. Then referring to
Picture 2
below,
unscrew the stainless screws #1, then the volute #5, and the seal gasket #4. Use a flathead screwdriver to hold
the shaft #2 then turn the impeller #3 counter-clockwise to release the impeller. Remove debris from around the
shaft and on and under the impeller. Then reassemble the impeller, gasket, volute, See
Picture 2.
10.
TROUBLESHOOTING
Do not disassemble the motor housing. This pump has NO repairable internal parts, and disassembling may cause an oil leak
or dangerous electrical wiring conditions.
Picture 2
No. Description
Qty
1 Screw
3
2 Shaft
1
3
Impeller 1
4
Gasket
1
5
Pump body
1
