WIL-IO-SP-WCC28001-11
2
1.
PREINSTALLATION CHECK
Inspect this pump before it is used. Occasionally, pumps can be damaged during shipping. If the pump or components
are deformed, cracked, or there is an oil leak, Call us Toll Free at: 866-945-6872 , or e-mail: [email protected]
Monday – Friday between 8 a.m. – 6 p.m., EST. ATTEMPTING TO USE A DAMAGED PUMP can result in personal injury or
death!
2.
DESCRIPTION
This Wilo submersible effluent pump is designed for pumping effluent, wastewater or flooded water with up to 3/4 inch
solids. The pump is built with overload thermal protections and auto reset. The pump is equipped with a 10’ 3-prong
grounding-type power cord and tethered float switch. This pump operates automatically. Ball bearings on motor shafts
never need lubrication.
Do not pump flammable or explosive liquids such as oil, gasoline, kerosene, ethanol, etc. Do not use in the
presence of flammable or explosive vapors. Using this pump with or near flammable liquids can cause
explosion or fire, resulting in serious personal injury or death and/or property damage.
3.
SPECIFICATIONS
Power supply required.........................................................
115V, 60 HZ
Water temperature range...................................................
Max.131°F (55°C)
Individual branch circuit required .....................................
15 Amp minimum
Discharge Connection.........................................................2” FNPT
Motor duty………………………………………………………………………..Continuous
Power cord………………………………………………………………………..SJTW, 18AWG/3C, 10ft
NOTICE:
This unit is not designed to be used to pump salt water or brine! Use with salt water or brine will void warranty.
4.
CONSTRUCTION
Motor housing……………………………………………......................Cast Iron
Motor cap………………………………………………………………………..Cast Iron
Volute………………….………………………………………………………….Cast Iron
Impeller…………………………………………………..………………………Reinforced thermoplastic vortex
5.
PERFORMANCE
Table 1
Model HP
GPM of Water @ Total Feet of Head
Max. Head
0 5ft.(1.5m)
10ft.(3m)
15ft.(4.6m)
20ft.(6.1m)
WCC28-20.50
1/2
63
58 49 38 24 25ft.
6.
GENERAL SAFETY INFORMATION
This pump is made of high-strength, corrosion-resistant materials. It will provide trouble-free service for a long time
when properly installed, maintained, and used. However, inadequate electrical power to the pump, dirt, or debris may
cause the pump to fail. To minimize the potential for water damage due to pump failure, please read the section of this
manual regarding common pump problems and remedies or call one of our pump experts at 866-945-6872
