en
8
Installation and operating instructions • Wilo-Rexa FIT-S • Ed.01/2022-03
–
Rinse eye thoroughly with water.
–
If eye irritation occurs, consult a doctor.
•
Inhalation
–
Remove from the contact area!
–
Create air exchange!
–
If the respiratory tract becomes irritated or
there is dizziness or nausea, consult a doc-
tor immediately!
•
Ingestion
–
Consult a doctor
immediately
!
–
Do not
induce vomiting!
2.14 Operator responsibilities
•
Provide installation and operating instructions
in a language which the personnel can under-
stand.
•
Make sure that the personnel have received
the required training for the specified work.
•
Provide protective equipment. Ensure that
the protective equipment is worn by person-
nel.
•
Ensure that safety and information signs
mounted on the device are always legible.
•
Train the personnel on how the system oper-
ates.
•
Fit dangerous components within the system
with an on-site guard.
•
Demarcate and cordon off the working area.
•
Measure the noise level. At noise levels of
85 dB(A) and over, wear hearing protection.
Demarcate the working area!
3
Transportation and storage
3.1
Delivery
•
After receiving the shipment, check it immediately for defects
(damage, completeness).
•
Defects must be noted on the freight documentation.
•
Defects must be notified to the transport company or the man-
ufacturer on the day of receipt of shipment.
•
Subsequently notified defects can no longer be asserted.
3.2
Transport
CAUTION
Soaked packaging may tear!
The product may fall on the ground if unprotected
and may be damaged. Lift wet packaging carefully
and replace it immediately!
Fig. 1:
Attachment point
•
Wear protective equipment! Observe the work regulations.
–
Protective gloves: 4X42C (uvex C500 wet)
–
Safety shoes: Protection class S1 (uvex 1 sport S1)
•
Carry the pump by the handle!
•
Protect the connection cable against water ingress. Do not im-
merse attached plugs in the pumped fluid.
•
Only remove the outer packaging at the place of utilisation to
ensure that the pump is not damaged during transport.
•
Use tear-proof plastic sacks of sufficient size to package the
used pump for transport in a leak-proof manner.
3.3
Storage
DANGER
Danger due to fluids which are hazardous to
health!
Danger of bacterial infection!
• Disinfect the pump after removal!
• Observe the specifications of the work regula-
tions!
WARNING
Risk of injury from sharp edges on the cut-
ting device!
The macerator has extremely sharp edges. In addi-
tion, sharp edges can form on the suction port.
There is a danger of cuts!
• Wear protective gloves!
• Do not touch the macerator!
CAUTION
Defective macerator due to objects lying
around!
Hard objects can damage the macerator! When set-
ting down, ensure that no objects come into contact
with the macerator.
