en
4
Installation and operating instructions • Wilo-Rexa FIT-S • Ed.01/2022-03
1
General information
1.1
About these instructions
These instructions form part of the product. Compliance with the
instructions is essential for correct handling and use:
•
Read the instructions carefully before all activities.
•
Keep the instructions in an accessible place at all times.
•
Observe all product specifications.
•
Observe the markings on the product.
The language of the original operating instructions is German. All
other languages of these instructions are translations of the ori-
ginal operating instructions.
1.2
Digital instructions
The digital version of the instructions is available on the following
product page:
https://qr.wilo.com/00414
1.3
Copyright
WILO SE © 2022
The reproduction, distribution and utilization of this document as
well as the communication of its contents to others without ex-
press authorization is prohibited. Offenders will be held liable for
the payment of damages. All rights reserved.
1.4
Subject to change
Wilo shall reserve the right to change the listed data without no-
tice and shall not be liable for technical inaccuracies and/or omis-
sions. The illustrations used may differ from the original and are in-
tended as an example representation of the device.
1.5
Exclusion from warranty and liability
Wilo shall specifically not assume any warranty or liability in the
following cases:
•
Inadequate configuration due to inadequate or incorrect in-
structions by the operator or the client
•
Non-compliance with these instructions
•
Improper use
•
Incorrect storage or transport
•
Incorrect installation or dismantling
•
Insufficient maintenance
•
Unauthorised repairs
•
Inadequate construction site
•
Chemical, electrical or electrochemical influences
•
Wear
2
Safety
This section contains basic information about
the individual stages in the life cycle of the
pump. Failure to observe this information leads
to:
•
Danger to persons
•
Danger to the environment
•
Property damage
•
Loss of claims for damages
2.1
Identification of safety instructions
These installation and operating instructions set
out safety instructions for preventing personal
injury and damage to property. These safety in-
structions are shown differently:
•
Safety instructions relating to personal injury
start with a signal word, are
preceded by a
corresponding symbol
and are shaded in
grey.
DANGER
Type and source of the danger!
Consequences of the danger and instructions for
avoidance.
•
Safety instructions relating to property dam-
age start with a signal word and are displayed
without
a symbol.
CAUTION
Type and source of the danger!
Consequences or information.
Signal words
•
DANGER!
Failure to observe the safety instructions will
result in serious injuries or death!
•
WARNING!
Failure to follow the instructions can lead to
(serious) injuries!
•
CAUTION!
Failure to follow the instructions can lead to
property damage and a possible total loss.
•
NOTICE!
Useful information on handling the product
Markups
✓
Prerequisite
1.
Work step/list
⇒
Notice/instructions
▶
Result
Identifying cross references
The name of the section or table is in inverted
commas [“ ”]. The page number follows in
square brackets [ ].
Symbols
These instructions use the following symbols:
