20
English
8.3.5 Menu description
List (Fig. A7)
<1.0.0.0>
• To adjust the setting point, turn the Red button.
The display changes to menu <1.0.0.0> and the
setpoint begins to blink. The new rotation (or a
new action on arrows) allows increasing or de-
creasing of the value.
• To confirm the change, press the Red button, the
display returns to the status page.
<2.0.0.0>
• The available operating modes are
«
Speed
control
»
,
«
Constant pressure
»
,
«
Variable pres-
sure
»
and P.I.D control.
<3.0.0.0>
<4.0.0.0>
•
The « Information » menu displays measuring,
device and operating data, see, (Fig. A8).
<5.0.0.0>
•
The « Service » menu allows access to changing
converter parameter settings.
<6.0.0.0>
• If one or several errors arise, the error log is dis-
played.
The letter « E » followed by three digit code ap
-
pears (chapter 10).
<7.0.0.0>
•
The « Access lock » is available when the switch 2
is in the ON position.
CAUTION!
Material damage!
Improper setting changes can lead to pump
operation defects, which can lead to material da-
mage on the pump or installation.
• Settings in « SERVICE » mode should only be
made during commissioning and only by skilled
technicians.
Symbol
Description
When the arrow appears:
• Pressing the Red Button allows the
access to the submenu (example
4000->4100).
When the arrow « return »” appears:
• Pressing the Red Button allows the
access to the higher menu (example
4150->4100).
Position
Switch 1
Description
OPERATION
OFF
Adjustment of the setting
point, possible for both
cases.
SERVICE
ON
Position
Switch 1
Description
OPERATION
OFF
Setting ON / OFF of the
pump.
SERVICE
ON
Position
Switch 1
Description
OPERATION
OFF
Only on reading for ope-
rating modes.
SERVICE
ON
Setting for operating
modes.
Position
Switch 1
Description
OPERATION
OFF
Only reading for the
« Information » menu.
SERVICE
ON
Position
Switch 1
Description
OPERATION
OFF
Only reading for the
« Service » menu.
SERVICE
ON
Setting for « Service »
menu.
Position
Switch 1
Description
OPERATION
OFF
Display of the error page.
SERVICE
ON
Position
Switch 1
Description
OPERATION
OFF
Display of « Access lock »
symbol.
SERVICE
ON
Helix EXCEL Complete - Installation and operation manual (Version 1 11012019)
Summary of Contents for Helix EXCEL Complete
