Wilo Drain-TM, User Manual

Page: 10 / 24

English How does the temperature control work?
8 WILO SE 04/2011
Intervention You can deactivate the intended time profile for the room
with the Basic Control for short periods and manually set a
desired temperature. A change of this sort is called an
intervention . The deviating temperature that is entered
will be maintained until the end of the time area defined in
the Geniax Central Control central user interface. Then the
heating sequence will again follow the preset time profile
[Fig. 4: Representation of the heating sequence during a
day in accordance with the specifications from the Geniax
Central Control (time profile with three created time
areas) Intervention by the Basic Control at 13:00 hrs,
page 8]
.
Fig. 4: Representation of the heating sequence during a day in accordance with the specifications from
the Geniax Central Control (time profile with three created time areas) Intervention by the Basic
Control at 13:00 hrs
R
oom temperatur
e
Time of day
21°C
16°C
05:00 08:00 12:00 19:00 23:00 13:00
Time profile active Time profile active
Intervention
active
16:00