en
Commissioning / Functional test
22
WILO SE 2020-11
ƒ
Insert the cable(s) and connect the shield in the pump housing according to the
installation and operating instructions or connect the shield with EMC threaded
cable gland (accessories).
ƒ
Assemble the RJ45 plug according to the enclosed instructions.
ƒ
Plug in the RJ45 plug.
NOTICE
Data can only be forwarded via this switch if the power supply to the pump is
switched on.
8
Commissioning / Functional test
These instructions describe the basic installation.
The complete instructions can be found at www.wilo.de/automation (German),
www.wilo.com/automation (English).
9
Maintenance
The modules described in these instructions are maintenance-free.
10
Faults, causes, remedies
Have repairs carried out by qualified personnel only!
DANGER
Risk of fatal electrical shock!
Ensure there are no risks arising from electrical current!
• The pump must be voltage-free and secured against unauthorised reactivation
prior to any repair work.
• Damage to the mains connecting cables should always be rectified by a qualified
electrician only.
WARNING
Risk of scalding!
At high fluid temperatures and system pressures, allow the pump to cool down
first and then depressurise the system.
If the malfunction cannot be rectified, consult a specialist technician or the nearest
Wilo customer service or representative location.
Summary of Contents for CIF-Module BACnet MS/TP
Page 3: ...3 Deutsch 4 English 14 Fran ais 24 Espa ol 34 Italiano 44...
Page 54: ......
Page 55: ......
