25
24
instructional videos
willowpump.com
| customer care
1-888-WILLOW-3
Willow Breast Pump Instructions for Use
7. INSTRUCTIONS FOR USE
7A. GET READY
1. BOIL FLANGE & FLEXTUBE
™
- FOR FIRST USE ONLY
b. Boil Flange and Flextube
™
for 10 minutes and place on a clean surface to air dry.
2.
WAKE UP WILLOW
Pump comes partially charged, but needs to wake up.
a. Plug Charger into outlet, then into Pump.
b. Wait until Pump lights up.
c. Unplug Charger from Pump.
fig 1a
Hold Pump
upright, then
open by squeezing
the two buttons on
the top-sides
of Flange.
fig 1b
Pull top open
first, then unhook
Tab and Slot.
a. Separate Flange from Pump
3. ASSEMBLY
BEFORE USING PUMP
Examine Pump and parts for any damage, cracks, chips or wear.
a. Connect Flextube
™
to Flange
fig 3a
Push Flextube
™
Tip
all the way down
onto Flange Spout.
fig 3b
Slide Flextube
™
Collar into top of
Flange. Listen for Collar
to ‘click’ into place.
click!
Make sure the
edges are flush.
Click!
No smooshed
nipples.
Don’t shift
the Pump.
