Rev. 12/2018
Installation & Operation Manual
AquaFount-90
®
Washfountain
WAF-2200 Series
Willoughby Industries, Inc.
TOLL FREE
(800) 428-4065
● LOCAL
(317) 875-0830
● FAX
(317) 875-0837
Page 14
www.willoughby-ind.com
Installation Instructions (cont.)
Step 2: Drain Assembly
INSTALLATION INSTRUCTIONS
Visit our website at http.//www.willoughby-ind.com
2210 West Morris Street • P.O. Box 21217 • Indianapolis, IN 46221
(317) 638-2381 • Fax: (317) 638-6110 • (800) 428-4065
© Rev. 4/2003
Page 3
STEP ONE
Pedestal Mounting
Parts supplied:
· Pedestal (pre-assembled)
Note: Hardware for wall anchoring by others.
1.) Remove plastic protective coating from all stainless parts before installation.
2.) Place pedestal in corner and mark mounting points (3 slots per side).
Note: Be sure back panel is level and plumb against wall so that water in basin will drain correctly
once assembly is completed.
3.) Drill holes in the wall for anchors.
4.) Secure the pedestal to wall using wall anchors that are adequate for the type of wall: drywall,
concrete, metal studs, wood studs, etc.
(supplied by others).
Parts/Materials supplied:
· Solid surface basin
· Drain assembly
1.) Insert drain spud into wash basin using plumbers
putty (supplied by others).
2.) From beneath basin, thread the washer & locknut
onto the drain spud and secure locknut against
wash basin.
3.) Secure drain cover using the provided security
screws
STEP TWO
Drain Assembly
© Rev. 5/2010
Parts/Materials supplied:
• Solid surface basin
• Drain assembly
1�)
Insert drain spud into wash basin using plumbers putty
(supplied by others)�
2.) From beneath basin, thread the washer & locknut onto the
drain spud and secure locknut against wash basin.
3�) Secure drain cover using the provided security screws�
Note: Over-tightening the locknut or security screws
can damage the solid surface basin and/or
drain assembly components.
