Williams LEGATO, Owner'S Manual

Page: 8 / 16

8
OWNER'S MANUAL
DEMO SONGS
There are 5 demo songs in the Legato piano.
Each demo song will demonstrate a different
voice as indicated in the chart below.
Demo Song Voice
1 Piano
2 Electric Piano
3 Organ
4 Synth
5 Bass and Piano
The demo songs may be selected by pressing
the REVERB and CHORUS buttons together
simultaneously for 5 seconds. The demo starts
with the Piano. During playback, another voice
may be chosen by pressing a different voice
select button.
OPERATIONS
Function Mode allows you to change
parameters for Voices, Voice Volume Level,
Layer Mode, Layer Volume Level, Split Mode,
Split Volume, Split Point and Tuning.
To enter Function Mode, press the Metronome
and Tempo buttons together.
Parameter values are entered using the
keyboard, which is scaled so that the keys in
the lower octaves provide low values and the
keys in the upper octaves provide high values.
C7=127 Press and hold data entry functions
should activate after 1.5 seconds.
See Appendix on pg. 14-15.
Voices
The Legato piano has 5 built-in voices. Each
voice may be selected one at a time. They can
be layered to produce two voices at once, or
assigned to the left or right hands in the split
mode.
Voices include: Piano, Electric Piano, Organ,
Synth and Bass.
To select a voice, press the Voice Select button
that relates to the sound listed above the
button.
The button will light and the LED will indicate
the selection.
Changing the Voice Volume Level
1. Press the Metronome and Tempo Buttons
together to enter the Function mode.
2. Pressing C#0 activates the voice volume
menu.
3. The volume can be changed in 88 note
steps from 0-127
4. Press the Metronome and Tempo Buttons
together again to exit the Function
mode.
Layer Mode
In Layer mode two voices may be played
simultaneously.
1. To layer two sounds, press the
corresponding voices simultaneously. Both
LEDs will light up while layered.
2. To turn Layer Mode off, select a single voice
button and the other Voice will be turned off.
To Change the Layer Volume Level
1. Press the Metronome and Tempo Buttons
together to enter the Function mode.
2. Pressing D#0 activates the layer volume
menu. The volume can be changed in 88
note steps from 0-127 where C7=127 and
A-1=0.
3. Pressing a key will play C3 of the currently
selected layered sound at the volume
corresponding to the key value.
4. Press the Metronome and Tempo Buttons
together again to exit the Function mode.