background image

11

LEGATO DIGITAL PIANO

WILLIAMSPIANOS.COM

ADVANCED 

FUNCTIONS

Advanced Function Mode
To enter Advanced Function Mode, press 

Metronome and Tempo buttons simultaneously. 

The keyboard does not play a sound at this 

point but is used for menu selection as per the 

information below.
To accept a menu setting press the Metronome 

and Tempo buttons simultaneously again. This 

will exit the Edit menu and then you will have 

to re-enter the Edit menu to make changes to 

other settings.
Factory Reset
Performing a Factory Reset will clear all battery 

backed memory and restore all functions to 

factory defaults. 
1.  Turn the Power Off.
2.  Hold down the [REVERB] and [CHORUS] 

buttons while powering on the piano (The 

LED Display will light ALL segments and all 

LEDs on the device will light).

3.  Release the [REVERB] and [CHORUS] 

buttons.

Velocity Curves
You can change the way the keyboard responds 

to your playing by adjusting the Velocity curve 

settings
1.  Press the Metronome and Tempo Buttons 

together to enter the Function mode.

2.  Press F#1, G#1 and A#1 to select between 

Low, Normal and High velocity curves. 

When selecting F#1 low, Piano 1 C3 will 

play at velocity value 30. When G#1 Normal 

is selected, Piano 1 C3 will play at velocity 

value 70. When A#1 High is selected, Piano 

1 C3 will play at velocity value 127 and the 

piano will exit Function Mode automatically.

Velocity Curve Table

F#1

Low Velocity

G#1

Normal Velocity

A#1

High Velocity

MIDI
The Musical Instrument Digital Interface 

(MIDI) is an industry-standard protocol that 

enables electronic musical instruments such 

as keyboards, computers, drum machines, 

etc. to communicate, control and synchronize 

with each other. MIDI transmissions consist of 

electronic codes that communicate notes to be 

played, the instrument, pitch or intensity that 

notes are to be played with, and the controlling 

codes such as volume, vibrato, cues and clock 

signals. The Legato has several functions that 

facilitate its use as a MIDI device or controller.
MIDI Channels
The Legato has 16 channels numbered from 

1-16. Each of the channels is responsible for 

a voice. When the instrument receives MIDI 

information from an external device, the active 

channel is determined by the control message.
The transmission channels are fixed as follows:
Channel 1 Master voice (keyboard)
Channel 2 Split voice (keyboard)
Channel 3 Layer voice (keyboard)

Local On/Off
Turning the Local On/Off function to “Off” will 

disconnect the keyboard from the internal 

sound engine of the piano. The Legato may 

then be used as a MIDI controller to control 

other MIDI devices or virtual instrument 

software running on a computer, without 

playing the sounds on the piano. Additionally, 

it may be desirable to turn local playing off for 

other requirements such as when using MIDI 

sequencing software on your computer.

Summary of Contents for LEGATO

















Reviews: