10
OWNER'S MANUAL
MENUS &
BUTTONS
There are 4 function buttons on the Legato that
control various functions. These are Reverb,
Chorus, Metronome and Tempo.
Reverb and Chorus Buttons
The Reverb and Chorus effects may be applied
to each voice individually and will be retained
even when the power is turned off.
To apply either effect, press either button. The
button will light and the effect will be heard
when the piano is played.
To turn off the effect, press the button of the
desired effect again and the LED light will go off.
To modify the depth of the effects
1. Press and hold the effect button
2. While this function is active the LED should
blink. You can then release the button and
press a key on the keyboard corresponding
to the setting you want for the reverb
depth. It's possible to change the setting by
pressing multiple keys after each other until
the right setting is found.
3. Set the reverb depth by pressing a key on
the keyboard to select the value. See the
Appendix for the value ranges.
4. The keyboard should still play the sound
originally selected so the user can hear the
new setting with the sound selected.
5. To exit, press the Reverb button again.
Reverb should be activated upon exit and
the LED button light.
Reverb and Chorus settings are set per
Instrument and retained over power cycling.
Metronome Button
1. Press the METRONOME button to activate
the metronome function. You can hear the
click in headphones or speakers. When on,
the button LED is lit.
2. To set the level of the metronome click,
press and hold the button. The LED will
blink once the menu is active.
3. You can then select the level by pressing a
key on the keyboard.
4. Press the Metronome button again to exit to
the previous state.
Tempo Button
This affects the speed of the metronome.
1. To change the tempo, press and hold the
button for 3 seconds to change the setting.
The LED will blink to current tempo speed.
If the Metronome is off, no sound will be
heard.
2. Press a key on the keyboard to select a
tempo. The LED will blink to the new value.
It is possible to make multiple changes and
see the LED tempo change as the keys are
pressed.
3. To exit, press the tempo button. The LED
will stop blinking and go off. See Appendix.
Tempo defaults to 120 but settings are retained
over power cycling. 120BPM = C3 or Middle C.
Advanced Functions/Edit mode for Metronome
and Tempo See Appendix pg 15.
Changing the Time Signature
Pressing the Metronome and Tempo butons
allows the user to change the time signature for
the metronome. When this menu is selected the
metronome starts playing at the current tempo
setting. Pressing G#0 toggles through the time
signature options starting with the current
setting. Default is 4/4 and the following options
are available to toggle through: 2/4, 3/4, 4/4,
5/4, 6/8, 9/8, 12/8.
Summary of Contents for LEGATO
Page 1: ...L EG ATO digital piano owner s manual ...
Page 2: ......
