SAFETY MESSAGES
WARNING
Read operation manual completely
before using torque instrument and
store for future reference.
Wear safety goggles-both user and
Bystanders
An out of calibration torque screwdriver can
cause part or tool breakage.
Periodic re-calibration is necessary to maintain
accuracy.
Do not exceed rated torque as overtorquing can
cause screwdriver or part failure.
Do not use torque instrument to break
fasteners loose.
Do not use cheater extension on the handle to
apply torque.
Broken or slipping tools can cause injury.
CAUTION
- RATCHET HEAD
Ratchet mechanism may slip or break if dirty,
mismatched or worn parts are used, or direction
lever is not fully engaged. Ratchets that slip or
break can cause injury.
MAINTENANCE / SERVICE
1.
The torque screwdriver’s internal mechanism is
permanently lubricated during assembly.
Do not
attempt to lubricate the internal mechanism.
2.
Clean torque screwdriver by wiping.
Do not immerse.
3.
Store torque screwdriver in protective tube at its
lowest indicated torque setting or up to 20% of full
scale.
Do not force knob below lowest setting.
ADJUSTMENTS OF
TORQUE SETTINGS
¼” FEMALE
HEX DRIVE
MAJOR
GRADUATIONS
ARROW
INDICATOR
A. To adjust knob hold body of screwdriver and
firmly pull knob to rear. (See Figure IV).
B. Set screwdriver to desired torque as follows
EXAMPLE - 22 Ncm.
1. Turn adjusting knob clockwise until the major
graduation line is aligned with the 20 on scale
(See Figure I) and arrow indicator on screwdriver
body is in line to “0” graduation on the adjusting
knob.
2. Turn adjusting know two increments clockwise.
Screwdriver is now set at
22 Ncm
. (See Figure II).
3. To lock adjusting knob, push towards the
drive until it clicks into the lock position. (See
Figure III).
4. To torque fastener, keep hand centered on
the screwdriver grip. Turn screwdriver
clockwise until a click/impulse is heard or felt.
The screwdriver will automatically reset for
the next operation.
ADJUSTING KNOB LOCKED PSOITION
FIGURE I
FIGURE II
2
MINOR
GRADUATIONS
ADJUSTING KNOB
PULL TO UN-LOCK
SET TORQUE VALUE
FIGURE III
FIGURE IV
ADJUSTING KNOB UNLOCKED PSOITION
