Williams Sound WIR RX4 Instructions Download Page 4

WIR 175 L

ISTENING

S

YSTEM

S

PECIFICATIONS

WIR TX295 Transmitter:

Size, Weight, Color:

6.25”L x 3.25”W x 1.25”H (15.9cm x 8.3cm x 3.2cm), 5.1oz. (140g), Gray

Power Input:

12 VDC (center is positive) on DC connector, 200 mA Class II wall transformer

TFP 024 Power Supply: North America: 120VAC, 60Hz, UL/CSA

TFP 032 Power Supply, 2 pin Euro mains plug, 230VAC, 50-60 Hz, CE

TFP 033 Power Supply, 3 pin UK mains plug, 230VAC, 50-60 Hz, CE

Subcarrier Frequency:

95 kHz or stereo or 250 kHz

Auto Power On/Off:

Transmitter shuts off infrared after 1.5 minutes when audio signal is removed.
Battery charging functions remain on full time.

Microphone Input:

3.5 mm jack for MIC 084 Electret TV Microphone, 1.5 k

Line Inputs:

2 RCA jacks for mono or stereo line-level sources. 200 mV min. to 10 V rms
max. input level, 5.1 k

Automatic Level Control:

35 dB compression range

Infrared LEDs, Pattern:

8 IR LEDs, 45 degree cone-shaped coverage pattern to 6dB intensity, 30ft.
(9m) line of sight

Charging Ports:

Charges one WIR RX295 Receiver (not included)

Warranty:

5 years*

RX4 Receiver:

Weight:

5.4 oz (154 g) with batteries

Earpad Size:

6.5 cm (2.5") Diameter, adjustable headband, uses HED 023 foam cushions

Material and Color:

ABS plastic, Textured Gray

Battery Type, Life:

2 - AAA Alkaline, 50 hours

Modulation Frequency:

95 kHz FM, 50 µS de-emphasis

Frequency Response:

200 Hz to 8 kHz, ± 5 dB

Signal to Noise Ratio:

60 dB at 4 m

Controls:

On/Off slide switch, volume control wheel

Acoustic Output:

105 dB MAX SSPL90, 100 dB HF AVG SSPL90 with 2 cc coupler

Compatability:

Compatible with most wide-band 95kHz IR Transmitters

Warranty:

5 years*

On Indicator:

Red LED

*90 days on battery, power supply and cords.

Williams Sound Corp.

10321 West 70th St., Eden Prairie, MN 55344-3459

U.S.A.  800-328-6190 / 952-943-2252 / FAX: 952-943-2174

www.williamssound.com

© 2003, Williams Sound Corp.              MAN 080E

4

Summary of Contents for WIR RX4

Page 1: ...able with dual RCA plugs WCA 078 BAT 010 Power Supply STEP 1 SET UP THE TX295 TRANSMITTER The WIR TX295 Transmitter may be placed on top of a TV or shelf Place the TX295 Transmitter where it is clearly visible from your listening position Infrared light behaves like visible light so it is blocked by solid objects This confines the signal to the room where the transmitter is located The transmitter...

Page 2: ...ransmitter is now setup to operate with the RX4 receiver STEP 4 CONNECT THE TRANSMITTER TO THE AUDIO SOURCE If you are using the TV Microphone plug it into the Mic jack on the TX295 as shown Use the Velcro strip supplied to attach the microphone near the loudspeaker of your TV The micro phone will allow you to play the TV at lower volume for other listeners and will pick up other important sounds ...

Page 3: ...tput 3 Make sure the TX295 is operating on 95 kHz not stereo or 250 kHz mode See Step 3 4 If you re using the TV Mic and not getting a sig nal 1 Be sure the audio cable is not plugged into the TX295 2 Try turning the TV volume up slightly 3 Try positioning the TV mic directly over the TV speaker 5 Make sure that the RX4 Receiver has working batteries 6 Make sure you are not covering the RX4 s infr...

Page 4: ...ontrol 35 dB compression range Infrared LEDs Pattern 8 IR LEDs 45 degree cone shaped coverage pattern to 6dB intensity 30ft 9m line of sight Charging Ports Charges one WIR RX295 Receiver not included Warranty 5 years RX4 Receiver Weight 5 4 oz 154 g with batteries Earpad Size 6 5 cm 2 5 Diameter adjustable headband uses HED 023 foam cushions Material and Color ABS plastic Textured Gray Battery Typ...

Reviews: