Williams Sound WIR RX4 Instructions Download Page 1

O

VERVIEW

Thank you for purchasing the WIR 175 Listening System from Williams Sound Corp.  Anyone
needing auditory assistance to overcome background noise, reverberation, or distance from the
sound source can benefit from the WIR 175.

You can use the WIR 175 for listening to the TV or other audio equipment, or for hearing assis-
tance in conference rooms. You can also use your RX4 Receiver in most facilities which have
an infrared transmitter operating on 95 kHz, such as theaters, cinemas, or churches.  

If at anytime you have problems with the system, do not hesitate to call us toll-free at 

1-800-843-3544.

S

YSTEM

C

OMPONENTS

1.

TX295 Transmitter 

2.

RX4 Receiver

• TV Microphone (MIC 084)

• AAA Batteries

• 1m Audio Cable with dual RCA plugs (WCA 078)

(BAT 010)

• Power Supply

S

TEP

1: S

ET

U

P

T

HE

TX295 T

RANSMITTER

The WIR TX295 Transmitter may be placed on top of a TV or shelf. Place the TX295 Transmitter where it is
clearly visible from your listening position.

Infrared light behaves like visible light, so it is blocked by solid objects. This confines the signal to the room
where the transmitter is located. The transmitter cannot be placed inside or behind anything except glass. The
maximum operating distance is approximately 30 feet (9 m).

WIR 175 Listening System Instructions

Model WIR TX295 Transmitter, WIR RX4 Receiver

Williams Sound 

®

Helping People Hear

1

Receiver Charging Cradle

Battery
Charging
Port

Battery
Charging
Port

Receiver
Charging 
Indicator

Right
Battery
Charging
Indicator

Left
Battery
Charging
Indicator

Infrared
Transmitting
Diodes

Infrared
Transmitting 
Diodes

(only for WIR 
RX295 Receiver)

Williams

Sound

Summary of Contents for WIR RX4

Page 1: ...able with dual RCA plugs WCA 078 BAT 010 Power Supply STEP 1 SET UP THE TX295 TRANSMITTER The WIR TX295 Transmitter may be placed on top of a TV or shelf Place the TX295 Transmitter where it is clearly visible from your listening position Infrared light behaves like visible light so it is blocked by solid objects This confines the signal to the room where the transmitter is located The transmitter...

Page 2: ...ransmitter is now setup to operate with the RX4 receiver STEP 4 CONNECT THE TRANSMITTER TO THE AUDIO SOURCE If you are using the TV Microphone plug it into the Mic jack on the TX295 as shown Use the Velcro strip supplied to attach the microphone near the loudspeaker of your TV The micro phone will allow you to play the TV at lower volume for other listeners and will pick up other important sounds ...

Page 3: ...tput 3 Make sure the TX295 is operating on 95 kHz not stereo or 250 kHz mode See Step 3 4 If you re using the TV Mic and not getting a sig nal 1 Be sure the audio cable is not plugged into the TX295 2 Try turning the TV volume up slightly 3 Try positioning the TV mic directly over the TV speaker 5 Make sure that the RX4 Receiver has working batteries 6 Make sure you are not covering the RX4 s infr...

Page 4: ...ontrol 35 dB compression range Infrared LEDs Pattern 8 IR LEDs 45 degree cone shaped coverage pattern to 6dB intensity 30ft 9m line of sight Charging Ports Charges one WIR RX295 Receiver not included Warranty 5 years RX4 Receiver Weight 5 4 oz 154 g with batteries Earpad Size 6 5 cm 2 5 Diameter adjustable headband uses HED 023 foam cushions Material and Color ABS plastic Textured Gray Battery Typ...

Reviews: