8
PPA T46 Personal PA 72-76 MHz Transmitter
Dual-Preset Mode
Dual-Preset Mode allows the user to
instantly access one of two independent
transmitting modes. Each preset
can have it’s own frequency, master
volume, and auxiliary volume settings.
After setup, the user can easily toggle
between the two presets.
Note: only one frequency/channel can
be transmitted at a time.
1. Turn the transmitter off by holding
the power button for 3 seconds.
The transmitter must be OFF before
performing the next step.
2. To access Dual-Preset Mode, push-
and-hold the Power and Menu buttons
together and keep holding them
until you see the following screen
“LOADING...” below.
3. The T46 will power up in Dual-Preset
Mode looking similar to the following
screen. “P1” and “P2” indicate the two
presets. The currently selected preset
is surrounded by the box showing “ON
AIR”. “ON AIR” means that this preset
is currently transmitting.
4. Use the left or right arrow buttons to
move the “ON AIR” box to the preset
you want to adjust. (Note that you are
now transmitting on this preset.)
5 . Push the Menu button and note
that either “P1” or “P2” shows up
on the top left corner of the screen.
This indicates which Preset you are
adjusting.
6. Follow the steps under “Basic Setup”
(starting at step 3) to set up each
preset and “Advanced Setup” (starting
at step 1) to change settings that affect
both presets.
7. To toggle between the two presets,
exit out of the menu and use the arrow
buttons to change between presets.
Note: In Dual-Preset Mode, if settings
are locked, the arrow buttons will
allow you to toggle between presets,
and the mic can be muted. All other
settings are locked.
