7
PPA T46 Personal PA 72-76 MHz Transmitter
4. 8-channel mode restricts the
transmitter to just the 8 non-interfering
(simultaneous broadcast) channels.
To change the transmitter between
8-channel and 17-channel modes,
push the menu button until you see
the channel selection mode screen,
below. Use the arrow buttons to
toggle between “17 CHANNEL MODE”
or “8 CHANNEL MODE”.
5. To change the display time-out period
(5, 30, or 60 seconds), push the menu
button until you see the time-out
screen, below. Use the arrow buttons
to toggle between “5 SECONDS” “30
SECONDS” or “60 SECONDS”.
6. To change the screen brightness
(level 1-4), push the menu button until
you see the brightness screen, below.
Use the left, right arrow buttons to
toggle between “1” “2” “3” or “4”.
7. To erase all user settings and return to
factory defaults, push the menu button
until you see the factory reset screen,
“ERASE ALL SETTINGS RESTORE
DEFAULTS?”, below. Push the right
arrow button to choose “YES”. After
this you will see the confirmation
screen “FACTORY DEFAULTS
RESTORED”. The transmitter will then
return back to the main screen.
8. To lock (or unlock) the settings, you
must first be on the Main Screen.
Then, push and hold the left- and right-
arrow buttons together. While holding
the buttons, you will see the following
dashed-line display. Keep holding the
buttons until all three lines disappear.
The display will then show “PRESS
MENU TO LOCK”. Push the Menu
button.
The display will then indicate “LOCKED”.
To unlock the settings, follow these
same steps in order.
