background image

4

IR Plus Assistive Listening System

Safety Warnings and Instruc-

tions

WARNING!

 

TO REDUCE THE RISK OF FIRE OR 

ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN 
OR MOISTURE.

CAUTION!

 

TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE 
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.

POWER CORD NOTICE FOR INTERNATIONAL 

OPERATION

 - Please call Williams AV Customer Service 

at 800.328.6190 to order the appropriate power cord for 

the country of use.

Important Safety Instructions:

1.  Read and follow these instructions
2.  Keep these instructions
3.  Clean only with dry cloth.
4.  Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

5.  Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 

appliance (including amplifiers) that produce heat.

6.  Do not defeat the safety purpose of the polarized 

or grounding-type plug. A polarized plug has two 

blades with one wider than the other. A grounding 

type plug has two blades and a third grounding 

prong. The wide blade or the third prong is 

provided for your safety. If the provided plug does 

not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet.

7.  Protect the power cord from being walked on 

or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from 

the appliance.

8.  Only use attachments/accessories specified by 

the manufacturer.

9.  Unplug this appliance during lightning storms or 

when unused for long periods of time.

10. Power Sources - The appliance should be 

connected to a power supply only of the type 

described in the operating instructions or as 

marked on the appliance.

11.  Object and Liquid Entry - Care should be taken so 

that objects do not fall and liquids are not spilled 

into the enclosure through the openings. Do not 

use this appliance near water or expose it to 

liquids.

12. Servicing - The user should not attempt to service 

the appliance beyond that described in the operating 

instructions. All other servicing should be referred to 

qualified service personnel.

Precautions:

1.  Power – WARNING, BEFORE TURNING ON THE POWER 

FOR THE FIRST TIME, READ THE FOLLOWING SECTION 

CAREFULLY. The unit is designed for use only with the 

line cord of the region in which it will be operated.

2.  Voltage Label (Rear Panel) – A label located at the rear 

panel power connection indicates the DC power input for 

the unit. The label will read 48VDC.

3.  Do Not Plug in the input, output, Ethernet, or Dante 

connections while the power switch is switched to the 

ON position.

4.  Do Not Touch the IR M1 with wet hands. Do not handle the 

IR M1 or power cord when your hands are wet or damp. If 

water or any other liquid enters the IR M1 cabinet, take the 

IR M1 to qualified service personnel for inspection.

5.  Place the IR M1 in a well ventilated location. Take special 

care to provide plenty of ventilation on all sides of the 

IR M1 especially when it is placed in an audio rack. If 

ventilation is blocked, the IR M1 may over heat and 

malfunction. Do not expose the IR M1 to direct sun 

light or heating units as the IR M1 internal components 

temperature may rise and shorten the life of the 

components. Avoid damp and dusty places.

6.  Care – From time to time you should wipe off the front 

and side panels and the cabinet with a soft cloth. Do not 

use rough material, thinners, alcohol or other chemical 

solvents or cloths since this may damage the finish or 

remove the panel graphics. 

Avertissements et instructions de 

sécurité

AVERTISSEMENT! 

POUR RÉDUIRE LES RISQUES 

D’INCENDIE OU DE CHOC ÉLECTRIQUE, NE PAS EXPOSER 

CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ.

MISE EN GARDE!

 

POUR RÉDUIRE LE RISQUE DE 

CHOC ÉLECTRIQUE, NE PAS RETIRER LE COUVERCLE. 

L’APPAREIL NE CONTIENT AUCUNE PIÈCE RÉPARABLE 

PAR L’UTILISATEUR. CONFIER LES RÉPARATIONS À UN 

RÉPARATEUR QUALIFIÉ.

AVIS CONCERNANT LE CORDON D’ALIMENTATION 

POUR UNE UTILISATION HORS DES ÉTATS-UNIS – 

Prière d’appeler le service à la clientèle de Williams AV au 

800.328.6190 pour commander le cordon d’alimentation 

adapté au pays dans lequel l’appareil va être utilisé.

Consignes de sécurité importantes :

1. Lire ces instructions

2. Conserver ces instructions

3. Nettoyer avec un chiffon sec uniquement.

Summary of Contents for IR E4

































Reviews: