4
Plug the power cord into a 120 V AC electrical outlet.
Invert the processing cup/blade assembly. Insert the blade collar into the motor base, fitting the tabs
into the slots on the motor base.
NOTE:
The Personal Blender will not operate unless the 3 locking tabs on the blade collar are properly
fitted into the 3 slots on the motor base
To process, turn the processing cup clockwise into the motor base and press down
on the top of the cup until locked in place. The blender will operate.
WARNING:
Do not operate the motor continuously for more than 1 minute at a time.
Allow the motor to rest for 3 minutes before continuing.
When processing is completed, turn the cup counter-clockwise in the base and lift to remove
the cup/blade assembly (figure 3).
Invert the cup/blade assembly. Hold the cup firmly in one hand. Use the other hand to turn
the blade collar counter-clockwise and remove the blade from the processing cup.
Add the lip ring to any cup to drink fresh juice, blended drinks or smoothies immediately.
Press down to fasten the lip ring to any of the blending cups.
Add the travel lid (with locking spout) to serve fresh juice, blended drinks or smoothies.
Twist lid clockwise to lock securely onto the tall cup. Flip top over pouring spout and press firmly to lock.
(See Figure 4.) Lock the travel lid to take your smoothie to go or add the storage lid to store leftovers
in the refrigerator for up to 24 hours.
Unplug the Personal Blender when not in use and before cleaning.
OPEN
LOCKED / CLOSED
FIGURE 4
- 24 MAX
FIGURE 2
- 24 MAX
- 24 MAX
FIGURE 3
