18
Maintenance and Repair
L4.05 Top Hook Assembly
Inspection Type:
Visual and Dimensional - contact manufacturer
Quantity: 1
Check for distortion, damage, fractures and stretching. The hook shall be free
and smooth to rotate, the hook to housing contact points should have even wear,
check top hook bolt hole to diagram.
Action: Shotblast and repaint or replace if required.
For ATEX variant contact manufacturer.
L4.06 Right Side Plate Assembly
Inspection Type:
Visual
Quantity: 1
Examine gear side plates for alignment and ensure they are free from damage
and distortion, examine load pin, guide, stripper and stay bolt holes for signs of
wear and stretch, check gear bushings are secure and in good condition.
Action: Shotblast and repaint or replace if necessary.
L4.07 Load Gear
Inspection Type:
Visual
Quantity: 1
Examine gear for wear, fracture and alignment. Check condition of internal
splines.
Action: Clean and regrease or replace if necessary.
L4.08 Pinion Shaft
Inspection Type:
Visual
Quantity: 1
Examine pinion shaft for damage and distortion, check shaft for
straightness, spline and thread condition.
Action: Clean and regrease or replace if necessary.
Summary of Contents for 033.075
Page 1: ...1 L4 Lever Hoist Manual incorporating the ATEX L4 Lever Hoist...
Page 2: ...2...
Page 14: ...14 Parts Explosion...
Page 31: ...31...
