William Hackett 033.075, Manual

Page: 8 / 32

8
Safe Use information
Do not attempt lifting operations unless you understand the use of the equipment, the lifting and slinging
procedures and you have been suitably trained.
William Hackett L4 lever hoists are not designed for lifting people and should not be used for that purpose.
Use appropriate personal protective equipment (PPE).
Always inspect the lever hoist prior to use, and if any damage is apparent the hoist should be quarantined for
inspection by a competent person. Labels should clearly show the identification and other data for the hoist.
Check the correct engagement of the top and bottom hooks.
Ensure that the suspension structure has sufficient load bearing strength and capacity to support the load.
Do not use the lever hoist as a chain sling; it is a lifting appliance and suitable lifting accessories should
be incorporated into the lift plan to facilitate a safe lifting operation.
If more than one lever hoist is to be used, refer to fleeting instructions on page 9..
Establish a clearly defined zone around the area of the lifting operation.
Always stand aside from the load when operating the hoist and ensure that no one enters the lift zone
unintentionally during the lifting operation.
Ensure that the load and hand chains are not twisted, particular care should be taken when using multi-fall
hoists.
During the lift the load and hand chains should be straight and should not contact any angles or edges.
Take the load steadily and avoid shock loads.
Do not expose lever hoist assemblies, chain slings and components to chemicals or corrosive solutions
(whether immersed in such solutions or used in atmospheres in which fumes are present), particularly acidic or
strongly alkaline environments without consulting the supplier or manufacturer.
Do not leave suspended loads unattended. In an emergency cordon off the working area and establish safe
exclusion zones.
Never return a damaged lever hoist to stores; it should be reported to a competent person.