Will Burt NIGHT SCAN, Operator'S Manual

Page: 30 / 46

N
IGHT
S
CAN
U
NIVERSAL
R
EMOTE
C
ONTROL
S
YSTEM
O
PERATOR
’
S
M
ANUAL
3-6 TP-5543301-C
July 2018
6. For fold-down units, raise the mast to 90° and turn on the lights by performing one of the
following steps:

Quickly press
the “Mast Up” button twice (Auto-up feature) to move mast to 90°
and turn both banks of lights on. To abort the Auto-up feature, press any controller
button.

Press and hold the
“Mast Up” button to raise the mast. Then press the “Lights”
button to turn the lights on. The RCP will become active when the mast is at 90°.
Only the controller buttons that have a lit LED are active.
For vertical units,
press the “Mast Up” button to raise the mast. Then press the
“Lights” button to turn the lights on.
The RCP will activate when safe operating conditions are met. The Display will list which
functions are available.
7. If desired, raise the mast further by pressing the
“Mast Up” button.
8. To position the light banks:

Vertically, press the “Tilt Down” button to rotate them down or the “Tilt Up”
button to rotate them up. Note that in dual-tilt systems the light banks will rotate
independently.

Horizontally, press the
“Pan Left” button to pan them left or the “Pan Right”
button to rotate them right.
9.
If an optional strobe/beacon light is equipped, press the “Aux 1” button to turn the
strobe/beacon on or off.
10.
If desired, lower the mast by pressing the “Mast Down” button.
11. Stow the mast by performing one of the following steps:

Quickly press the “Mast Down” button twice (Auto Stow
®
feature). It is
recommended to use the Auto Stow
®
feature to stow the mast. To abort Auto Stow
®
,
press the any controller button.

Press and hold “Mast Down” until the Display turns off which indicates that the
mast is stowed.
The mast will automatically power off when the mast is stowed.