Wilfa LUN FW-1, Instruction Manual

Page: 27 / 32

3
Engelsk
P. 3
Engelsk
3
English
P.
WARNING
INSTRUCTION MANUAL AND GUIDELINES FOR CORRECT, SAFE
OPERATION
READ THIS INSTRUCTION MANUAL CAREFULLY
AND KEEP IT FOR FUTURE USE.
THIS INSTRUCTION MANUAL PROVIDES IMPORTANT
INSTRUCTIONS FOR OPERATION, AS WELL AS SAFETY DURING
INSTALLATION, OPERATION AND MAINTENANCE.
General guidelines
1 After opening the package, check that the product is intact and
has no visible signs of being damaged in transit.
2 Before plugging in the product, check that the technical
specifications provided correspond to your mains supply. You
can find these specifications on the label affixed to the product.
3 Do not use an adapter and/or extension cord. If the plug does
not fit the socket, the plug must be replaced with an appropriate
one by a qualified person.
4
This product may only be used as a foot warmer as indicated in
this instruction manual. Any other use may be dangerous. The
manufacturer bears no responsibility for injuries arising from
incorrect use.
5
Certain basic rules must be followed when using all electrical
products.
In particular, remember the following:
– Never touch the foot warmer with wet or damp hands or feet.
– Never pull on the power cord or the actual foot warmer in order to
disconnect from the mains supply.
– Do not use the foot warmer out of doors.
6
Always disconnect the foot warmer from the mains supply
before cleaning or performing maintenance on it.
7 If the foot warmer stops working, does not function normally, or if
the fuse is triggered, unplug it. Do not try to repair the appliance
yourself. Take the product to an authorised service centre/dealer
for repair.
8 To avoid the appliance overheating, it is recommended that the
power cord be fully extended before use, and that the mains
supply is disconnected when the foot warmer is not in use.