FEATU
RES
SUITABLE SURFACES
WWW.TRIDENTPROTECTS.COM
866-951-4293
TECHNICAL DATA SHEET
Surface Enhancement
Minimal to slight enhancement with matte finish—the extent is dependent on the surface
Joint Stabilization
Hardens joint sand which reduces sand washout, weeds and insect infestation
Surface Protection
Guards against salt, mild acid, alkali and other corrosives
Provides stain resistance which makes cleaning and maintenance easier
Antifungal film protection protects sealer film from mold, moss and algae
Concrete & Clay Pavers
Natural & Manufactured Stone
MUST TEST FIRST*
Flat and Stamped Concrete
Travertine
Clay Roof Tiles
Segmental Retaining Wall Blocks
Concrete Walls
Exposed Aggregate
Not recommended for marble, granite,
ceramic tile and polished, honed or
high gloss surfaces as they do not have
enough surface texture to absorb the
sealer
Cyclone | Page 1 | TDS 113 | Revised Date: 5.1.2020
CYCLONE
SEALER
TDS 113
Coverage based on single application. Actual coverage may vary depending on the type, age, condition, joint size and porosity of
the surface, application method and other local conditions such as temperature and humidity. For more uniform coverage or if
desired a light second coat may be applied after the first coat has dried to the touch.
COVERAGE PER GALLON
APPLICATION
SQ FEET
SQ METERS
Sealing With Joint Stabilization
80-120
7.4-11.1
Sealing Only Without Joint Stabilization
150-250
13.9-23.2
PURPOSE
PERFORM A TEST IN A SMALL AREA TO VERIFY PERFORMANCE AND APPEARANCE BEFORE APPLYING.
*Due to the variability and physical make-up of natural stone this step is required to verify desired performance and appearance.
Hardens Joint Sand
Prevents sand erosion and deters weeds/insects
One Easy Application
Protects surface & stabilizes sand joints in one application
Surface Appearance Freshener
Locks in a clean, natural look with matte finish
Advanced Single Component, Acrylic
Co-Polymer Formula
Will not yellow under exposure to sunlight
Offers long term durability
Fungal Guard
Added antifungal protects sealer film from mold, moss & algae
Breathable, Immediate Application
Will not trap naturally occurring efflorescence and/or moisture.
Can be applied on a new, clean and dry surface without waiting
Film Forming, Water Based,
LOW VOC Sealer
Consistency of water, milky white in appearance when applied, dries clear
Environmentally friendly, EPA compliant
Temperature Stable
Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to 180°F (82°C)
INDUSTRY’S MOST TRUSTED JOINT STABILIZING SEALER FOR OVER 30 YEARS
