Error Codes
7
Wile 200 is equipped with error messages to guide the user to get the
most reliable results, as well as to ensure that the meter is in good
condition.
Error code
Cause
Solution
Critical Error
The meter must be submitted to an
authorized service center
7
Weight not detected
Repeat test / Do weight test
8
Taring result is too high
Do weight test and check the scale
9
Weight measurement uncertain /
meter shook during the measure-
ment
Keep the meter stable,
measurement uncertainty has in-
creased
10
Moisture measurement result
stabilize slowly
Happens to very wet samples
11
Weight measurement too un-
certain / meter shook during the
measurement
Keep the meter stable, measurement
uncertainty has increased
12
Temperature of the sample lower
than 2 C / Measurement uncer-
tainty is high
The tester is most accurate when grain
and tester temperature is between 16C
and 32C
13
Temperature of the sample above
50 C / Measurement uncertainty
is high
The tester is most accurate when grain
and tester temperature is between 16C
and 32C
14
Large temp. diff. between the grain
and test cell / Measurement uncer-
tainty has increased
For better accuracy, grain and meter
test cell should be at similar tempera-
tures
15
Not on a suffciently level surface,
meter warns with sound alarm
Keep meter stable during measure-
ment
16
Weight result is over 330 g
Check that leveling handle did not stay
above the test cell/ Do weight test
17
Weigh result is under 50 g
Check that leveling handle did not stay
above the test cell/ Do weight test
18
Hectoliter weight is 20% higher
than average
Measurement uncertainty has in-
creased, Do weight test
19
Hectoliter weight is 20% lower
than average
Measurement uncertainty has in-
creased, Do weight test
20
Test cell is not cleared before the
measurement
Clear test cell
